- 采购产品 (点击可查看详细)
- 采购商经营行业
- 采购商所在国家
- 更新日期
- 发送邮件
- 标准规格的鞋类,工业鞋类,防护鞋类,专用鞋类,木制鞋,防护工作服,手套,内科医疗用纺织品,外科医疗用纺织品,旅馆家具,饭店家具,小卖部家具,酒吧用家具,工业场所用家具,工业场所用装架,实验室用家具,实验室用装架,强化纸板,硫化纤维纸板半成品,家用橡胶制品,塑料半成品,建筑业用塑料制品,塑料桶,塑料圆桶,塑料罐,塑料箱,包装用容器,存储用容器,运输用容器,塑料瓶,包装用塑料管,塑料制品,洗涤剂,清洁剂,漂白剂,脂酸类肥皂,脂酸类清洁剂,化妆品,护发用品,护肤用品,洁齿用品,油漆,底漆,合成粘合剂,胶粘剂,油灰,密封用化合物,矿物纤维制品,包装用金属容器,运输用金属容器,存储用金属容器,金属钉,平头钉,道钉,订书钉,非车制螺丝钉,非车制金属螺母,非车制金属螺栓,非车制金属垫圈,工业用金属紧固件,工业用金属固定装置,车制金属螺丝,车制金属螺栓,车制金属螺母,车制金属垫圈,车制金属铆钉,小型金属器具,五金器具,刀具,金刚石手工工具,硬金属手工工具,切削工具,割刀,锯切工具,锤子,木锤,工具,钳子,夹子,工具,夹子类似工具,螺丝刀,扳手,扳手类似工具,锉刀,粗锉,粗锉类似工具,凿子,螺丝模,冲模,螺纹铣床,刨子,手工铰刀,手工铰刀类似工具,工作台,铁砧,台钳,台钳类似工具,木工工具
- 标准规格的鞋类,工业鞋类,防护鞋类,专用鞋类,木制鞋,防护工作服,手套,内科医疗用纺织品,外科医疗用纺织品,旅馆家具,饭店家具,小卖部家具,酒吧用家具,工业场所用家具,工业场所用装架,实验室用家具,实验室用装架,强化纸板,硫化纤维纸板半成品,家用橡胶制品,塑料半成品,建筑业用塑料制品,塑料桶,塑料圆桶,塑料罐,塑料箱,包装用容器,存储用容器,运输用容器,塑料瓶,包装用塑料管,塑料制品,洗涤剂,清洁剂,漂白剂,脂酸类肥皂,脂酸类清洁剂,化妆品,护发用品,护肤用品,洁齿用品,油漆,底漆,合成粘合剂,胶粘剂,油灰,密封用化合物,矿物纤维制品,包装用金属容器,运输用金属容器,存储用金属容器,金属钉,平头钉,道钉,订书钉,非车制螺丝钉,非车制金属螺母,非车制金属螺栓,非车制金属垫圈,工业用金属紧固件,工业用金属固定装置,车制金属螺丝,车制金属螺栓,车制金属螺母,车制金属垫圈,车制金属铆钉,小型金属器具,五金器具,刀具,金刚石手工工具,硬金属手工工具,切削工具,割刀,锯切工具,锤子,木锤,工具,钳子,夹子,工具,夹子类似工具,螺丝刀,扳手,扳手类似工具,锉刀,粗锉,粗锉类似工具,凿子,螺丝模,冲模,螺纹铣床,刨子,手工铰刀,手工铰刀类似工具,工作台,铁砧,台钳,台钳类似工具,木工工具
- 挪威
- 2010-06-19
- 天然气生产及供应,防护工作服,手套,家用家具,旅馆家具,饭店家具,小卖部家具,酒吧用家具,工业场所用家具,工业场所用装架,实验室用家具,实验室用装架,建筑业用塑料制品,机械工程用塑料制品,塑料制品,磷化合物,硫化合物,碳化合物,硅化合物,铯化合物,压缩瓦斯,液化瓦斯,冷冻用化学物,多种用途的化学品,建筑工程用非结构金属预制件,金属脚手架,金属梯子,包装用金属容器,运输用金属容器,存储用金属容器,非车制螺丝钉,非车制金属螺母,非车制金属螺栓,非车制金属垫圈,非车制金属铆钉,工业用金属紧固件,工业用金属固定装置,弹簧,机械减震器,减震装置,车制金属螺丝,车制金属螺栓,车制金属螺母,车制金属垫圈,车制金属铆钉,滑动轴承,轴台,轴枕,支座,轴衬,滚珠轴承,滚针轴承,滚柱轴承,小型金属器具,五金器具,金刚石手工工具,硬金属手工工具,切削工具,割刀,锯切工具,锤子,木锤,工具,钳子,夹子,工具,螺丝刀,扳手,扳手类似工具,锉刀,粗锉,粗锉类似工具,凿子,螺丝模,冲模,螺纹铣床,刨子,手工铰刀,手工铰刀类似工具,工作台,铁砧,台钳,台钳类似工具,木工工具
- 天然气生产及供应,防护工作服,手套,家用家具,旅馆家具,饭店家具,小卖部家具,酒吧用家具,工业场所用家具,工业场所用装架,实验室用家具,实验室用装架,建筑业用塑料制品,机械工程用塑料制品,塑料制品,磷化合物,硫化合物,碳化合物,硅化合物,铯化合物,压缩瓦斯,液化瓦斯,冷冻用化学物,多种用途的化学品,建筑工程用非结构金属预制件,金属脚手架,金属梯子,包装用金属容器,运输用金属容器,存储用金属容器,非车制螺丝钉,非车制金属螺母,非车制金属螺栓,非车制金属垫圈,非车制金属铆钉,工业用金属紧固件,工业用金属固定装置,弹簧,机械减震器,减震装置,车制金属螺丝,车制金属螺栓,车制金属螺母,车制金属垫圈,车制金属铆钉,滑动轴承,轴台,轴枕,支座,轴衬,滚珠轴承,滚针轴承,滚柱轴承,小型金属器具,五金器具,金刚石手工工具,硬金属手工工具,切削工具,割刀,锯切工具,锤子,木锤,工具,钳子,夹子,工具,螺丝刀,扳手,扳手类似工具,锉刀,粗锉,粗锉类似工具,凿子,螺丝模,冲模,螺纹铣床,刨子,手工铰刀,手工铰刀类似工具,工作台,铁砧,台钳,台钳类似工具,木工工具
- 挪威
- 2010-08-17
- 推土机、筑路机、平地机、铲运机等工程机械
- 推土机、筑路机、平地机、铲运机等工程机械
- 荷兰
- 2010-07-26
- 工业场所用家具,工业场所用装架,实验室用家具,实验室用装架,刀具,剪刀,大剪刀,剃刀,刀片,建筑工具,橡胶工业检测设备,塑料工业检测设备,皮革工业检测设备,绘图仪器,数学仪器,长度测量仪器,面积测量仪器,体积测量仪器,农业工具,园艺工具,锯木机械
- 工业场所用家具,工业场所用装架,实验室用家具,实验室用装架,刀具,剪刀,大剪刀,剃刀,刀片,建筑工具,橡胶工业检测设备,塑料工业检测设备,皮革工业检测设备,绘图仪器,数学仪器,长度测量仪器,面积测量仪器,体积测量仪器,农业工具,园艺工具,锯木机械
- 丹麦
- 2010-06-19
- 五金,建筑材料及设施
- 五金,建筑材料及设施
- 瑞典
- 2010-07-29
- 五金制品,手工工具,园艺用品
- 五金制品,手工工具,园艺用品
- 澳大利亚
- 2010-07-11
- 切削金属的钻床、镗床、铣床、攻丝机床〔车床除外〕,其他发动机及其零件,电动机及发电机(不包括发电机组),专门或主要用于编号为8456至8465机器的零、附件〔包括工件或工具的夹具及其他专用于机床的附件〕,手推车,专门用于地下使用的连续运输货物和材料的升降机和传送机,金属加工用液压机,液体泵(不论是否装有计量装置；液体提升机),焊接机器及装置、气体加温表面回火机器装置及其零件,其他升降、搬运、装卸机械〔包括升降机、自动梯、输送机〕,其他用于激光操作的机床、金属加工机组、车床和钻床等的零件和附件,船用桅杆式起重机、移动式吊运架、跨运车等,牵引车、拖拉机(编号8709的牵引车除外),金属、金属陶瓷等的其他非切削加工机床,切削金属的刨床、插床、拉床、切齿机及其他机床,齿轮及其他变速、传动装置(不包括带齿轮、链轮齿)滚珠螺杆传动轴、变速箱和其它变速装置(包括转矩变换器),小型金属件制造设备,其它金属或金属陶瓷的磨削、研磨、抛光等精加工机床,手工锯；各种锯的锯片,其他加工金属机床(包括压机),铁道及电车道非机动客车及特殊用途车辆,点燃式往复或旋转式活塞内燃机及压燃式内燃活塞发动机的零件,港口设备
- 切削金属的钻床、镗床、铣床、攻丝机床〔车床除外〕,其他发动机及其零件,电动机及发电机(不包括发电机组),专门或主要用于编号为8456至8465机器的零、附件〔包括工件或工具的夹具及其他专用于机床的附件〕,手推车,专门用于地下使用的连续运输货物和材料的升降机和传送机,金属加工用液压机,液体泵(不论是否装有计量装置；液体提升机),焊接机器及装置、气体加温表面回火机器装置及其零件,其他升降、搬运、装卸机械〔包括升降机、自动梯、输送机〕,其他用于激光操作的机床、金属加工机组、车床和钻床等的零件和附件,船用桅杆式起重机、移动式吊运架、跨运车等,牵引车、拖拉机(编号8709的牵引车除外),金属、金属陶瓷等的其他非切削加工机床,切削金属的刨床、插床、拉床、切齿机及其他机床,齿轮及其他变速、传动装置(不包括带齿轮、链轮齿)滚珠螺杆传动轴、变速箱和其它变速装置(包括转矩变换器),小型金属件制造设备,其它金属或金属陶瓷的磨削、研磨、抛光等精加工机床,手工锯；各种锯的锯片,其他加工金属机床(包括压机),铁道及电车道非机动客车及特殊用途车辆,点燃式往复或旋转式活塞内燃机及压燃式内燃活塞发动机的零件,港口设备
- 荷兰
- 2010-08-03
- 进口商品描述
- 数量
- 重量
- 进口商品价格
- 国家
- 抵港日期
- 发送邮件
- HOUSE WARE OFFICE ACCESSORIES THIS SHIPM ENT CONTAINS NO SOLID WOOD PACKING MATERI ALS
- 1029/CTN
- 30492/LB
- 联系在线客服
- CHINA
- 2010-7-8
- WASH BRUSH CLEANING CLOTH WASH BRUSH CLEANING CLOTH CARD FOR 6-60 NO DESCRIPTION NO DESCRIPTION NO DESCRIPTION
- 3892/CTN
- 12695/KG
- 联系在线客服
- CHINA
- 2010-7-8
- 12 BUNDLES 2,350 PCS NEW AGRICULTURAL DISC BLADES AS PER PURCHASE ORDER 201445
- 12/BDL
- 19638/KG
- 联系在线客服
- BRAZIL
- 2010-7-8
- SHIPPERS LOAD & COUNT (766CTNS) CY / CY COPY NON-NEGOTIABLE B/L RELEASE PROCEDURES FREIGHT COLLECT 6065.600GW, 18.480CM, 766CTN GARDEN TOOLS(LUCTADOR HANDSAW) WPM HB/L#61N0145056 MB/L#HDMUHKWB9806921
- 766/CC
- 6066/KG
- 联系在线客服
- CHINA
- 2010-7-8
- POWER TOOLS,SUPER COMBO KIT POWER TOOLS,SUPER COMBO KIT NO WPM HBL#61N0145991 MBL#CHNJYTNLAX110751 PLS ISSUE SEAWAY BILL
- 1197/CTN
- 15740/KG
- 联系在线客服
- CHINA
- 2010-7-8
- HAND TOOLS SOCKET WRENCH SETS 19633 KGS 53 CBM HAND TOOLS SOCKET WRENCH SETS THIS SHIPMENT CONTAINS SOLID WOODEN PACKING MATERIALS.
- 782/CTN
- 19633/KG
- 联系在线客服
- CHINA
- 2010-7-8
- 20 BUNDLES 3,774 PCS NEW AGRICULTURAL DISC BLADES AS PER PURCHASE ORDER 201443
- 20/BDL
- 18958/KG
- 联系在线客服
- BRAZIL
- 2010-7-8
- POWER TOOLS (STARTER KIT) NO POWER TOOLS (STARTER KIT) NO WPM HBL#61N0145999 MBL#CHNJYTNLAX110758
- 1071/CTN
- 16386/KG
- 联系在线客服
- CHINA
- 2010-7-8
- AMADA BANDSAW MACHINE WITH STANDARD ACCESSORIES HS CODE 846150 (1UNIT, 1 CTN, 1 BUNDLE, 1 BALE, 3 CANS AND 1 PC)
- 8/PKG
- 6600/KG
- 联系在线客服
- JAPAN
- 2010-7-8
- SHIPPERS LOAD, COUNT & SEAL (1145PACKAGES) CY / CY 225 PCS OF GEAR,CRANKSHAFT,POWER BIT,NUT DRIVER,TOOL SET, TAP ADAPTER,LOCK CHUCK, COMPONENTS,PONCHO, AIR FILTER,STAPLES,STAMPED COVER ASSEMBLY,GARDEN TOOLS,GLASS WARE, BONECHINA WARE,PUMP PART, MOTOR RUN CAPACITOR RF_DRY_USE FREIGHT PREPAID COPY NON-NEGOTIABLE B/L RELEASE PROCEDURES.
- 1145/PK
- 24628/KG
- 联系在线客服
- FINLAND
- 2010-7-8
- 询盘产品信息
- 详细内容
- 采购商所在国家
- 更新日期
- 发送邮件
- Jewelry Making Tools & Equipment Laser Marking Machine
- Hallo? I am a jewelry business man fron Nairobi Kenya. Well I am humbly requesting you to email me a detailed cataloque of atleast two or three modern machines that have the capacity to make chains, bracelets,bangles,rings,earrings,etc from metals like pure silver,gold,brass or copper. A machine that can make all fancy designs. Please give me the best quality and pocket friendly price. Thank you. Muniu Francis Benson, P.O Box 25646 00100. Nairobi Kenya. Mobile +254723324110 muniufb@yahoo.com
- South Africa
- 2010-07-23
- Brush Cutters
- Dear Sir, We are a reputed Trading Company in Dubai, we require Brush Cutters Qty 750. Very Important- Product should have ISO or ISI Certification. TECHNICAL SPECIFICATION : Power: Not less than 2.10 HP Maximum output: 10000 RPM Transmission: 28mm dia transmission. Fuel Primer: Mounted on the Engine Cowl Top Engine: Petrol Type of Engine: Two stroke Air cooled Weight: less than 7.5 kgs. Cutting tools: 40 Tooth 255mm dia, Blade non breakable type. Carburator : Warlbro Air filter: Dual type cloth plus foam Type: Portable Accessories: Holding Jacket, eye protecting glass And one side lay Kindly send me the best quote with exactly the same specifications above with the pictures. Thanks & Regards Siraj Bhimani Lunar General Trading LLC., P.O.Box # 29567, DUBAI (U.A.E.) Tel: +9714-3936696/+9714-3935882 Fax: +9714-3935774 Mobile: +971-5-01299786 E-mail: siraj@lgt-group.com Website: www.lgt-group.com
- United Arab Emirates
- 2010-06-11
- brush cutter
- Dear Sir, We are a reputed Trading Company in Dubai, we require Brush Cutters Qty 750. Very Important- Product should have ISO or ISI Certification. TECHNICAL SPECIFICATION : Power: Not less than 2.10 HP Maximum output: 10000 RPM Transmission: 28mm dia transmission. Fuel Primer: Mounted on the Engine Cowl Top Engine: Petrol Type of Engine: Two stroke Air cooled Weight: less than 7.5 kgs. Cutting tools: 40 Tooth 255mm dia, Blade non breakable type. Carburator : Warlbro Air filter: Dual type cloth plus foam Type: Portable Accessories: Holding Jacket, eye protecting glass And one side lay Kindly send me the best quote with exactly the same specifications above with the pictures. Thanks & Regards Siraj Bhimani Lunar General Trading LLC., P.O.Box # 29567, DUBAI (U.A.E.) Tel: +9714-3936696/+9714-3935882 Fax: +9714-3935774 Mobile: +971-5-01299786 E-mail: siraj@lgt-group.com Website: www.lgt-group.com
- United Arab Emirates
- 2010-07-14
- Cylinder Head Man Diesel Engine
- Dear Madam/Sir, Greeting! We writing this letter in the hope of entering business relationship with you! The following are some information a bout our company. We are pleased to introduce ourselves as a company in Iran which is active in an importer And supplier of industrial tools and also official agent of pioneer company in England . Dear colleague, we need man railway spare parts such as man engine. we sincerely hope To get long term cooperation with you ,which I believe can bring profit to both us. Would you please inform us about price of it . I hope this information will be useful for you. Hope hear from you soon. In the mean time ,you can contact us as per following details: WEB:www.pioneerengineering.co.uk E-mail:pioneertrade98@ymail.com Best regards, m.abbasi
- 2010-07-08
- pressure gauge
- FOR THE KIND ATTN. OF SALES/ EXPORTS DIVISION Dear Sirs, We are trading firm, deal in machinery, Tools and Accessories. We have a new enquiry for GAUGE THREAD RING GO & NO GO, detailed as under; S.No. Specification Qty 1. M5x0.8-5h6h 2 Sets 2. M12x0.5-6h 2 Sets 3. M16x1-5h6h 2 Sets 4. M8 x 0.5h6h 2 Sets 5. M2.5x0.45-5h6h 2 Sets 6. M3x0.5-5h6h 2 Sets 7. M4x0.7-5h6h 2 Sets 8. M6x0.5-5h6h 2 Sets (Left hand) 9. M16x1-6h6h 2 Sets 10. M3x0.5-5h6h 3 Sets Kindly qoute your best FOB and C&F(Karachi/ Pakistan), prices for the same. Please note that your quotation should reach us by 30 Sept. 2009, at the latest. If you are not interested or are not in such a position, please forward our enquiry to some other companies, supplying/exporting the above products, if possible. Thanks and kind regards
- Pakistan
- 2010-08-08
- Helmet Night Vision Goggles ( Model Number : MWG-7 )
- Kind Attn : Sales We need integrated flying helmet for MI-17 Helicopter Qty-100 Pcs if you have to manufacture , Pls give me your quotes and detail regard. Also we need the NVG mount /Rack if you got both reply me as early as . REGARD. SURJEET SINGH JUPITOR TOOLS (INDIA) www.jupitortools.com
- 2010-06-19
- China Kelin Power Tools Manufacture & Co.
- Hi there, My name is Ion, I\'m from Romania. Will you send me some more informations about this scrollsaw, such as features,other models, prices, minimum quantity to be ordered? Thank you
- United States of America
- 2010-08-15
- pressure gauge
- FOR THE KIND ATTN. OF SALES/ EXPORTS DIVISION Dear Sirs, We are trading firm, deal in machinery, Tools and Accessories. We have a new enquiry for GAUGE THREAD RING GO & NO GO, detailed as under; S.No. Specification Qty 1. M5x0.8-5h6h 2 Sets 2. M12x0.5-6h 2 Sets 3. M16x1-5h6h 2 Sets 4. M8 x 0.5h6h 2 Sets 5. M2.5x0.45-5h6h 2 Sets 6. M3x0.5-5h6h 2 Sets 7. M4x0.7-5h6h 2 Sets 8. M6x0.5-5h6h 2 Sets (Left hand) 9. M16x1-6h6h 2 Sets 10. M3x0.5-5h6h 3 Sets Kindly qoute your best FOB and C&F(Karachi/ Pakistan), prices for the same. Please note that your quotation should reach us by 30 Sept. 2009, at the latest. If you are not interested or are not in such a position, please forward our enquiry to some other companies, supplying/exporting the above products, if possible. Thanks and kind regards
- Pakistan
- 2010-06-19
- scarifier,Garden tools,Electric hoe(TS-HOE)
- Dear Sirs, Good day! My name is Tanya and I am import manager of Irit company, Russia. We have got found info about you in Internet and decided to write you a letter. Could you also send an offer to me with short description, prices and pictures of the inquired goods. If you have questions, you\'re welcome to contact me: pts@rtp.sp.ru http://www.irit.com.ru Thank you in advance for any information you can give us. Looking forward for hearing from you. Yours faithfully, Tanya. Import manager \"Irit\" company, 31, Latyshskih strelkov Saint-Petersburg, 195213 Russia. tel (fax): 007 812 4495256 MSN: candy_@mail.ru
- China
- 2010-07-26
- Busbar Fabrication Machine(DHY-150, DHY-200)
- please quote urbest price c.i.f oman for model DHY150 and DHY200 BUS BAR TOOLS
- Netherlands
- 2010-08-07
- China Kelin Power Tools Manufacture & Co.
- Hi there, My name is Ion, I\'m from Romania. Will you send me some more informations about this scrollsaw, such as features,other models, prices, minimum quantity to be ordered? Thank you
- United States of America
- 2010-09-05
- Engine Vlave
- I am interested in establishing links for retailing of the chisel palm oil and harvesting knife here in Honiara Solomon Islands. I am currently operating a welding business providing clamps for extension of harvesting poles with the GPPOL a palm oil company operating in the Solomon Islands. I would like to expand in supplying the company with these other tools as an agent for your company. thank you.
- Solomon Islands
- 2010-08-03
- sell rotor,armature for makita power tools
- Power tools spare parts wholesale from china! Dear sir: This is a professional work in power tools spare part&accessory wholesale in china. We can supply complete spare parts and very low price. Mainly in: Armature, Rotor, Gears, Bearings, Switches, Wires,Chain, Carbon Brush, Headpiece&Body,Plastic parts, Steel parts and Aluminum parts etc. Also. We can accept OEM order. Refer my website: Http://www.weifengtools.com Website updating and Some models no showing there. So it\'s better you add my MSN: anolcn@hotmail.com Or Skype: toolparts Email:toolparts@yahoo.cn Let\'s talk online. Any problem can call me: 0086-13735706999 Look forward cooperate soon! Ms.Nono WEIFENG TOOLS PARTS CO.,LTD
- China
- 2010-08-15
- Multifunctional grass cutter
- Dear Sir, We are a reputed Trading Company in Dubai, we require Brush Cutters Qty 750. Very Important- Product should have ISO or ISI Certification. TECHNICAL SPECIFICATION : Power: Not less than 2.10 HP Maximum output: 10000 RPM Transmission: 28mm dia transmission. Fuel Primer: Mounted on the Engine Cowl Top Engine: Petrol Type of Engine: Two stroke Air cooled Weight: less than 7.5 kgs. Cutting tools: 40 Tooth 255mm dia, Blade non breakable type. Carburator : Warlbro Air filter: Dual type cloth plus foam Type: Portable Accessories: Holding Jacket, eye protecting glass And one side lay Kindly send me the best quote with exactly the same specifications above with the pictures. Thanks & Regards Siraj Bhimani Lunar General Trading LLC., P.O.Box # 29567, DUBAI (U.A.E.) Tel: +9714-3936696/+9714-3935882 Fax: +9714-3935774 Mobile: +971-5-01299786 E-mail: siraj@lgt-group.com Website: www.lgt-group.com
- United Arab Emirates
- 2010-07-14
- Inquiry for yongkang kaibang tools co,. ltd->Marble Cutter MC2-110
- Hello , my is Beno Regis. I need your catalog priclist and shiping price to Brasil
- United States of America
- 2010-07-12
- Candy Plate
- Good morning. We need to quote the following products: 12 EA Adjustable Choke 3 1/8 3M R31 Flanged Ends Hwo x 2 max orifice API 6A PSL1, PR1,AA, U. Additionally, we need the following information: Weight per unit Number of crates Quality certificates Catalogs . Incoterm Type of Guarantee for the products Thank you for your prompt response. GUILLERMO APONTE Product engineer. V.A. TOOLS LTDA Phone: 57-1-2987000
- Colombia
- 2010-06-11
- Small Hydro Turbine Unit(power plant )
- Penton2 CONTENT SEC1 - EQUIPMENT / MATERIAL DESCRIPTION SEC2 - STANDARDS SEC3 - REQUIRED DOCUMENTS SEC4 – PROPOSAL CONDITION SEC 1 EQUIPMENT / MATERIAL DESCRIPTION 1 GENERAL This Material Requisition covers the technical requirements for the design, engineering, manufacturing, supply, delivery FOB, testing, supervision to erection, start up, commissioning, contractual spare parts and training of: N° 2 Pelton turbines complete with auxiliaries N° 2 Turbine inlet vales of spherical type complete with auxiliaries N° 2 Turbine speed governors complete with auxiliaries N° 2 Generators horizontal or vertical shaft according the The equipment will be installed in the Monga Power Station located in Panama Seller supply shall include all the items required in this specification as well as all the other accessory and additional equipment that the Seller deems to be necessary for a good performance and safe operation of the supplied package. Each Pelton turbine will be directly coupled with an electric generator supplied as package with the turbine Seller shall design the Pelton Turbines and their auxiliaries and shall be responsible for the design of the whole turbine /generator lineshaft The Pelton Turbines will discharge in a non-pressurized channel. 2.REQUIREMENTS 2.1 GENERAL NOTES The design, manufacturing, testing, inspection, painting, packing, supply and workshop testing of all equipment / materials included in the scope of work shall be in accordance with this Material Requisition, attached contractual specifications and applicable codes and standards. Eventual deviations or modification are acceptable provided sufficient explanation to justify them Under no circumstances, any of the statements of this specification or of the purchase order waive the supplier to provide all services and supplies necessary to fulfill its contractual obligations. Anyhow the compliance with standards, Codes and Specifications does not relieve the Vendor for his responsibility to furnish equipment, materials and accessories of proper design and manufacturing as well as fully suitable for all specified duties, operating conditions and guaranteed performances. Purchaser approval of any Vendor or Vendor sub-supplier drawings / documents shall not relieve the vendor from any of his responsibility for errors or omissions which may exists, even though Work has been done in accordance with such approved drawings and documents. Where such errors or omissions are discovered even later, they shall be made good by the Vendor at his sole expense irrespective of any approval of the Purchaser. The approval or acceptance by the Purchaser of any inspection or test does not relieve the vendor from his responsibility regarding the guarantees and will not however prejudice the right of the Company to reject the supply if it does not comply with specifications or, once erected, it does not give complete satisfaction in service. 2.2 SPECIAL Equipment shall be designed for indoor installation inside to a power house with forced ventilation, installation elevation will be 800,00 masl approx. The operating temperate will range from 0° to 50°C and the maximum relative humidity will be of 90% Equipment shall be designed for continuous operation and parallel connected to a national network 3 CONTRACT LANGUAGE (1) All contractual documents related to supply must be written in the two languages here below indicated : - English X - Spanish contract technical dwg 4.CONFLICTING REQUIREMENTS, in case of contract Any deviations from the requirements of the documents applicable to the project, shall be clearly pointed-out and submitted to the Purchaser for Approval before starting the manufacturing of the related pieces. In case a deviation is not approved by the Purchaser, the Seller will have to follow the requirements of the documents applicable to the project. Any impact on cost / schedule relating to this will be Seller responsibility. 5.GARANTEES 5.1 GENERAL Approval of design, documents, inspections and tests does not affect the contractual rights of the Purchaser, and under no circumstances waives contractual obligations of the Seller especially with regard to design, performance, construction and materials. The Seller is fully responsible for: his entire scope of work providing correct interfacing data at the boundary limits of its supply conformity of his scope of delivery and services to this specification and to all codes and standards herein mentioned. 5.2 TECHNICAL GUARANTEES 5.2.1OVERALL The Seller guarantees: faultless construction and appropriate material perfectly satisfactory design and function correct choice of material and painting that precludes corrosion and erosion, attacks, which might affect function and efficiency The Seller shall bear full responsibility for the technical accuracy, constructability, and functionality under extreme operating conditions of the systems until expiration of the guarantee period of the plant, system compatibility with other interfacing equipment and compliance with all applicable codes, standards as well as for meeting the delivery deadlines. 5.2.2DESIGN PERFORMANCE The Seller guarantees the quoted performances and the pitting and erosion performances in accordance with IEC 60-609-2-97 5.3SITE GENERAL CONDITIONS The Supplier shall take special precautions in the selection and protection of materials and equipment against deterioration due to the effects of humidity, temperature and dust. Particular attention must be paid to selection and protection of electronic components, instrumentation and temperature/humidity sensitive equipment. 5.OVERALL REQUIREMENTS FOR THE COMPLETE TURBOGENERATOR UNIT 6.1 PELTON TURBINE The hydro turbines shall be Pelton type fed by river water at the conditions described in the attached documents. The turbines will be normally operated in parallel with the grid; the normal operating mode is at the maximum load consistent with the available flow, head and other operating control parameters as mentioned in the attached specification Each turbine is equipped with an inlet valve of the butterfly type, whose technical features and operating mode shall be described with the offer Each turbine will be directly coupled to a 4,16 KV electric generator (included from the supply)with brushless or selfexcited system and shall be fitted with all the necessary supervisory and control devices to enable remote start up, operation and shutdown from the control room. 6.2 SPEED GOVERNOR Each turbine is equipped with its own speed governor whose technical features and operating mode shall be described in the offer 7. SCOPE OF SUPPLY Scope of supply will consist of, but not limited to: Equipment and materials N° 2 Pelton Turbines as per attached characteristic, each one consisting of but not limited to: Pelton wheel Turbine box Turbine shaft complete with bearings Bearing housing cooling coils Cooling water instruments as required Turbine iinjectors and deflectors Servomotors Rigid coupling with generator and relevant coupling bolts Vibration monitoring system (Option) Anchor bolts for installation on foundation First filling of lubricants. Special tools, saddles and slings for transport, erection and maintenance, incl. hydraulic device for stretching bolts, if any Commissioning spare parts Recommended spare parts Painting Internal/external piping (piping 2” dia. and above shall be supplied prefabricated with end preparation) All piping terminal connections shall be supplied complete of counter flange an bolting; if welded shall be prepared for butt welding Turbine auxiliary equipment and systems Steel base or inserts to be embedded if any Position control sensors for inyectors and deflectors Instruments, transmitters, on-off valves, control valves, metal temperature elements, etc. for turbine control, monitoring and safety system Junction boxes and cabling up terminal junction boxes Turbine local control panel with suitable interface Temporary instrumentation for tests and performance tests N° 2 Butterfly Valves each one consisting of, but not limited to: Valve body and ball Counterweight for valve closing purpose Valve foundation plates Automatic Valve by-pass to equilibrate the pressure up and down stream the max operation pressure Dismantling joint downstream of the valve Flanged interconnecting piece upstream of the valve for connection with penstock complete with of the necessary flanged taps Limit switches Oleodynamis type opening , servomotor and auxiliary equipment Anchor bolts for installation on foundation First filling of lubricants. Special tools, saddles and slings for transport, erection and maintenance, incl. hydraulic device for stretching bolts, if any Commissioning spare parts - 2 years recommended Spare parts Painting Internal/external piping (piping 2” dia. and above shall be supplied prefabricated with end preparation) All piping terminal connections shall be supplied complete of counter flange an bolting; if welded shall be prepared for butt welding Instruments, transmitters, on-off valves, control valves, metal temperature elements, etc. for control, monitoring and safety system Junction boxes and cabling up terminal junction boxes Valve local control panel with suitable interface Temporary instrumentation for tests and performance tests N° 2 Turbine Speed Governor each one consisting of, but not limited to: Control, monitoring and safety system of the turbine including any other necessary type of equipment/devices, even if not mentioned in this material requisition, in order to provide a complete black box in addition to: - Instruments, transmitters, on-off valves, control valves, metal temperature elements, impulse lines, instrument block valves, racks, JBs , Control Panels, interfacing system etc. on the Turbine / Spherical Valve including associated auxiliary circuits equipment and piping - Cables, conduits and accessories for the connections of above field instrumentation up to local junction boxes and junction boxes themselves. - Turbine Protection, Control and Supervisory system and instruments N° 2 Oleohydraulic control stations complete with motorized pumps, oil tanks, oil accumulators, oil cooler (water cooled) actuated and manual valves, filters, instruments, fittings, including - Flow reduction valve to control the actuator operation speed Conntrol panel with fitted a microprocessor OTC controller to control the turbine operation Commissioning spare parts Recommended spare parts Painting First filling of control oil.if any Special tools, saddles and slings for transport, erection and maintenance. Temporary instrumentation for tests and performance tests Services Process, mechanical, electrical and structural design for the equipment; Workshop and site inspections and tests; Training of Client personnel at site; Mechanical and electrical supervisors to the installation and test on commissioning Temporary instrumentation for turbine performance tests including installation before and removal after the test Conducting turbine performance test including preparation of procedures, test supervisory personnel, analysis of data and final report; Basic and detailed design for the equipment, systems and interfacing coordination for items not included in the scope of supply such as generators and DCS. Engineering documentation (1) Minimum required documentation shall be as per paragraph 3.4 “Required Document Table” General-Please provide with the offer a draft of: Quality plan and ITP (Inspection and Test Plan); List of tests included in the offer Packing suitable for transportation Battery limits - Penstock upstream side of the interconnecting piece (13 m from turbine axis approx) - Turbine shaft generator side: coupling flange to generator shaft flange, coupling bolts included - Civil Works: foundation plates and counterplates embedded in concrete first and second phases - Drain system: drain piping outlet into turbine discharge channel - Cooling water: in / out cooling water connections for control oil cooler and bearing housing cooling coils,if any - Electrical/Instrumentation: terminal boxes for electric motors Terminal strips of skid junction boxes Terminal strips of field instruments junction boxes Terminal strips of local control panels for connection with above junction boxes Terminal strips of local control panels for DCS interconnections Note 1) interconnection cabling between skid mounted junction boxes and local control panels are excluded from the supply interconnection cabling between field junction boxes and local control panels are excluded from the supply interconnection cabling between local control panels and DCS are excluded from the supply 8.PACKING All equipment/materials included in the scope of supply shall be packed for ocean transport. 9.NOISE LEVEL Sound pressure level equivalent 85 dBA @ 1 meter 10.DELIVERY Deliveries, FOB Italian Port, in months from purchase order date: Please fill, this schedule and return it with the offer - Unit n° 1 & 2, plates to be embedded if any months - Unit n° 1, Pelton box, feeding piping including fo bolts and plates, phase concrete embedded materials months - Unit n° 1, Completion of Pelton turbine n° 1 (wheel, shaft, bearings, nozzles, etc) ……… months - Unit n° 1 Butterfly valve complete with accessories and connecting Piece to penstock………… - Unit n° 1 Speed governor complete………months - Unit n° 2, Pelton box, feeding piping including bifurcation, foundation bolts and plates, 2nd phase concrete embedded materials months - Unit n° 2, Completion of Pelton turbine n° 1 (wheel, shaft, bearings, nozzles, etc) ………months - Unit n° 2 Butterfly valve complete with accessories and connecting Piece to penstock…………month - Unit n° 2 Speed governor complete…………months SECTION 2 APPLICABLE STANDARDS 1. GENERAL The Standards applicable to the supply are listed in the documents attached to the Material Requisition. Different Standards can be proposed but have to be proved equivalent or more stringent than the listed ones. Standards submitted for approval will be in Spanish and English language SECTION 3 VENDOR DOCUMENTATION In case of contract or subcontract 1. DOCUMENTS DUE DATES As minimum requirement, the documents to be issued by Seller are listed in the following Paragraph 3.4. The due dates will be mutually agreed during the final negotiation, before the issue of the Purchase Order (P.O.). The final “Document List” shall be issued by Vendor two (2) weeks after the issue of the P.O. With reference to above Paragraph 3.4, Seller is informed that in case the documents shall not be issued within the contractual due date, the penalties indicated in the purchase order will be applied. Seller is advised that, further to listed documents, supply shall include an “Equipment Dossier” complete of Material Certificates, Inspection Reports and other involved issues. 2. FORMATS OF DOCUMENTS All drawings shall be prepared using a CAD system; final electronic files shall be “DWG” type (i.e. AutoCAD® type). Other documents shall be prepared using Microsoft® Word®97 or Excel®97.The purchaser can use different system to be coordinated with us Preferred maximum size for drawing is A1. Copies of drawings in format A1, A2 or A3 shall be folded to A4 size. 3. IDENTIFICATION Any document shall have its own identification number, on its right - bottom side. The documents shall bear the Project Name, the identification of the involved equipment or item and the related contractual tag number. Each document page shall have a page number , to be referred also to the total number of pages of the document itself, as well as the number of its revision. SECTION 4 1)Turbine design data Turbines style Pelton Design Flow Qn 2.25 cmt/sec Gross head Hg 141 mt Net head Hn 140.14 m Penstock diam. 48 inch- Tick 3/8” Total length 823 Mt Project Flow curve as function of the time period See attached table Table 13: Time period in % Flow cm3/sec Time period % Flow cm3/sec No of nozzles : to be quoted Shaft Vertical or horizontal Rated speed >= 600 rpm Material : Runner Inox steel ASTM A 743 or similar Bifurcation Steel Nozzles Inox steel CrNi 17-4 or similar 2) Generator Type Syncronous, 3ph,TEFC t Rated voltage: 4.16 KV Rated frequency 60 Hz Power factor 0.8 Rated speed >= 600 rpm Overspeed <= Vn x 200 % time for 5 Min Excitation type Brushless Class of insulation F/F ( Stator/rotor wind.) Temperature rises to Class B of IEC standards/codes Construction to be quoted Protection degree IP 23 Service S1 Cooling type IC 01 Standards IEC Ambient conditions: Hasl < 1000 mt Max amb temp 45°C Hr from 70 to 90 % Ambient Tropical climate Fittings: No 1 Automatic voltage regulator No 3 C.ts on neutral point ratio …. / 1 – 30 VA burden No 3 PT100 type RTDs on stator windings No 1 Pt 100 type RTD on each bearing No 1 Anticondensation heater No 1 Speed measuring inductive type Lifting lugs No 1 set of special tools if necessary for assembly and disassembly purpose No 2 valves on admission Type Butterfly Nom diameter 700 mm Rated pressure 25 Bar Kind of closure by counterweight Kind of opening oleohydraulic or equivalent Accessoires as per art 2 above Aux voltage 220 V .60 Hz Frequency 60 Hz Commercial conditions Technical offer composition : Design and performances datas of turbine and generator Short description of components and their features List of tests of draft of quality plan Layout drawings with weights and dimensions Economical FOB Price in USA $ currency including ocean packing tests on workshop and relevant certification detailled engineering with layout dwgs, technical spec, manuals, list of electrical loads, etc Supervision to be quoted on daily tariff excluding board and Lodging, local entry permits, local transportation Delivery time: to be quoted including engineering, supply,and FOB transport, Erection period please let us have an estimation Offer validity: December 30 -09 Payment. We propose 10 % down at subcontract signature 5 % at the engineering dwgs delivery, load list, turbine final performances 70 % by milestones during costruction in your factory, test an FOB delivery 15 % at the PAC and FAC certificates issuing date Area and sales mngr
- Germany
- 2010-06-18
- Pelton Turbine
- Penton2 CONTENT SEC1 - EQUIPMENT / MATERIAL DESCRIPTION SEC2 - STANDARDS SEC3 - REQUIRED DOCUMENTS SEC4 – PROPOSAL CONDITION SEC 1 EQUIPMENT / MATERIAL DESCRIPTION 1 GENERAL This Material Requisition covers the technical requirements for the design, engineering, manufacturing, supply, delivery FOB, testing, supervision to erection, start up, commissioning, contractual spare parts and training of: N° 2 Pelton turbines complete with auxiliaries N° 2 Turbine inlet vales of spherical type complete with auxiliaries N° 2 Turbine speed governors complete with auxiliaries N° 2 Generators horizontal or vertical shaft according the The equipment will be installed in the Monga Power Station located in Panama Seller supply shall include all the items required in this specification as well as all the other accessory and additional equipment that the Seller deems to be necessary for a good performance and safe operation of the supplied package. Each Pelton turbine will be directly coupled with an electric generator supplied as package with the turbine Seller shall design the Pelton Turbines and their auxiliaries and shall be responsible for the design of the whole turbine /generator lineshaft The Pelton Turbines will discharge in a non-pressurized channel. 2.REQUIREMENTS 2.1 GENERAL NOTES The design, manufacturing, testing, inspection, painting, packing, supply and workshop testing of all equipment / materials included in the scope of work shall be in accordance with this Material Requisition, attached contractual specifications and applicable codes and standards. Eventual deviations or modification are acceptable provided sufficient explanation to justify them Under no circumstances, any of the statements of this specification or of the purchase order waive the supplier to provide all services and supplies necessary to fulfill its contractual obligations. Anyhow the compliance with standards, Codes and Specifications does not relieve the Vendor for his responsibility to furnish equipment, materials and accessories of proper design and manufacturing as well as fully suitable for all specified duties, operating conditions and guaranteed performances. Purchaser approval of any Vendor or Vendor sub-supplier drawings / documents shall not relieve the vendor from any of his responsibility for errors or omissions which may exists, even though Work has been done in accordance with such approved drawings and documents. Where such errors or omissions are discovered even later, they shall be made good by the Vendor at his sole expense irrespective of any approval of the Purchaser. The approval or acceptance by the Purchaser of any inspection or test does not relieve the vendor from his responsibility regarding the guarantees and will not however prejudice the right of the Company to reject the supply if it does not comply with specifications or, once erected, it does not give complete satisfaction in service. 2.2 SPECIAL Equipment shall be designed for indoor installation inside to a power house with forced ventilation, installation elevation will be 800,00 masl approx. The operating temperate will range from 0° to 50°C and the maximum relative humidity will be of 90% Equipment shall be designed for continuous operation and parallel connected to a national network 3 CONTRACT LANGUAGE (1) All contractual documents related to supply must be written in the two languages here below indicated : - English X - Spanish contract technical dwg 4.CONFLICTING REQUIREMENTS, in case of contract Any deviations from the requirements of the documents applicable to the project, shall be clearly pointed-out and submitted to the Purchaser for Approval before starting the manufacturing of the related pieces. In case a deviation is not approved by the Purchaser, the Seller will have to follow the requirements of the documents applicable to the project. Any impact on cost / schedule relating to this will be Seller responsibility. 5.GARANTEES 5.1 GENERAL Approval of design, documents, inspections and tests does not affect the contractual rights of the Purchaser, and under no circumstances waives contractual obligations of the Seller especially with regard to design, performance, construction and materials. The Seller is fully responsible for: his entire scope of work providing correct interfacing data at the boundary limits of its supply conformity of his scope of delivery and services to this specification and to all codes and standards herein mentioned. 5.2 TECHNICAL GUARANTEES 5.2.1OVERALL The Seller guarantees: faultless construction and appropriate material perfectly satisfactory design and function correct choice of material and painting that precludes corrosion and erosion, attacks, which might affect function and efficiency The Seller shall bear full responsibility for the technical accuracy, constructability, and functionality under extreme operating conditions of the systems until expiration of the guarantee period of the plant, system compatibility with other interfacing equipment and compliance with all applicable codes, standards as well as for meeting the delivery deadlines. 5.2.2DESIGN PERFORMANCE The Seller guarantees the quoted performances and the pitting and erosion performances in accordance with IEC 60-609-2-97 5.3SITE GENERAL CONDITIONS The Supplier shall take special precautions in the selection and protection of materials and equipment against deterioration due to the effects of humidity, temperature and dust. Particular attention must be paid to selection and protection of electronic components, instrumentation and temperature/humidity sensitive equipment. 5.OVERALL REQUIREMENTS FOR THE COMPLETE TURBOGENERATOR UNIT 6.1 PELTON TURBINE The hydro turbines shall be Pelton type fed by river water at the conditions described in the attached documents. The turbines will be normally operated in parallel with the grid; the normal operating mode is at the maximum load consistent with the available flow, head and other operating control parameters as mentioned in the attached specification Each turbine is equipped with an inlet valve of the butterfly type, whose technical features and operating mode shall be described with the offer Each turbine will be directly coupled to a 4,16 KV electric generator (included from the supply)with brushless or selfexcited system and shall be fitted with all the necessary supervisory and control devices to enable remote start up, operation and shutdown from the control room. 6.2 SPEED GOVERNOR Each turbine is equipped with its own speed governor whose technical features and operating mode shall be described in the offer 7. SCOPE OF SUPPLY Scope of supply will consist of, but not limited to: Equipment and materials N° 2 Pelton Turbines as per attached characteristic, each one consisting of but not limited to: Pelton wheel Turbine box Turbine shaft complete with bearings Bearing housing cooling coils Cooling water instruments as required Turbine iinjectors and deflectors Servomotors Rigid coupling with generator and relevant coupling bolts Vibration monitoring system (Option) Anchor bolts for installation on foundation First filling of lubricants. Special tools, saddles and slings for transport, erection and maintenance, incl. hydraulic device for stretching bolts, if any Commissioning spare parts Recommended spare parts Painting Internal/external piping (piping 2” dia. and above shall be supplied prefabricated with end preparation) All piping terminal connections shall be supplied complete of counter flange an bolting; if welded shall be prepared for butt welding Turbine auxiliary equipment and systems Steel base or inserts to be embedded if any Position control sensors for inyectors and deflectors Instruments, transmitters, on-off valves, control valves, metal temperature elements, etc. for turbine control, monitoring and safety system Junction boxes and cabling up terminal junction boxes Turbine local control panel with suitable interface Temporary instrumentation for tests and performance tests N° 2 Butterfly Valves each one consisting of, but not limited to: Valve body and ball Counterweight for valve closing purpose Valve foundation plates Automatic Valve by-pass to equilibrate the pressure up and down stream the max operation pressure Dismantling joint downstream of the valve Flanged interconnecting piece upstream of the valve for connection with penstock complete with of the necessary flanged taps Limit switches Oleodynamis type opening , servomotor and auxiliary equipment Anchor bolts for installation on foundation First filling of lubricants. Special tools, saddles and slings for transport, erection and maintenance, incl. hydraulic device for stretching bolts, if any Commissioning spare parts - 2 years recommended Spare parts Painting Internal/external piping (piping 2” dia. and above shall be supplied prefabricated with end preparation) All piping terminal connections shall be supplied complete of counter flange an bolting; if welded shall be prepared for butt welding Instruments, transmitters, on-off valves, control valves, metal temperature elements, etc. for control, monitoring and safety system Junction boxes and cabling up terminal junction boxes Valve local control panel with suitable interface Temporary instrumentation for tests and performance tests N° 2 Turbine Speed Governor each one consisting of, but not limited to: Control, monitoring and safety system of the turbine including any other necessary type of equipment/devices, even if not mentioned in this material requisition, in order to provide a complete black box in addition to: - Instruments, transmitters, on-off valves, control valves, metal temperature elements, impulse lines, instrument block valves, racks, JBs , Control Panels, interfacing system etc. on the Turbine / Spherical Valve including associated auxiliary circuits equipment and piping - Cables, conduits and accessories for the connections of above field instrumentation up to local junction boxes and junction boxes themselves. - Turbine Protection, Control and Supervisory system and instruments N° 2 Oleohydraulic control stations complete with motorized pumps, oil tanks, oil accumulators, oil cooler (water cooled) actuated and manual valves, filters, instruments, fittings, including - Flow reduction valve to control the actuator operation speed Conntrol panel with fitted a microprocessor OTC controller to control the turbine operation Commissioning spare parts Recommended spare parts Painting First filling of control oil.if any Special tools, saddles and slings for transport, erection and maintenance. Temporary instrumentation for tests and performance tests Services Process, mechanical, electrical and structural design for the equipment; Workshop and site inspections and tests; Training of Client personnel at site; Mechanical and electrical supervisors to the installation and test on commissioning Temporary instrumentation for turbine performance tests including installation before and removal after the test Conducting turbine performance test including preparation of procedures, test supervisory personnel, analysis of data and final report; Basic and detailed design for the equipment, systems and interfacing coordination for items not included in the scope of supply such as generators and DCS. Engineering documentation (1) Minimum required documentation shall be as per paragraph 3.4 “Required Document Table” General-Please provide with the offer a draft of: Quality plan and ITP (Inspection and Test Plan); List of tests included in the offer Packing suitable for transportation Battery limits - Penstock upstream side of the interconnecting piece (13 m from turbine axis approx) - Turbine shaft generator side: coupling flange to generator shaft flange, coupling bolts included - Civil Works: foundation plates and counterplates embedded in concrete first and second phases - Drain system: drain piping outlet into turbine discharge channel - Cooling water: in / out cooling water connections for control oil cooler and bearing housing cooling coils,if any - Electrical/Instrumentation: terminal boxes for electric motors Terminal strips of skid junction boxes Terminal strips of field instruments junction boxes Terminal strips of local control panels for connection with above junction boxes Terminal strips of local control panels for DCS interconnections Note 1) interconnection cabling between skid mounted junction boxes and local control panels are excluded from the supply interconnection cabling between field junction boxes and local control panels are excluded from the supply interconnection cabling between local control panels and DCS are excluded from the supply 8.PACKING All equipment/materials included in the scope of supply shall be packed for ocean transport. 9.NOISE LEVEL Sound pressure level equivalent 85 dBA @ 1 meter 10.DELIVERY Deliveries, FOB Italian Port, in months from purchase order date: Please fill, this schedule and return it with the offer - Unit n° 1 & 2, plates to be embedded if any months - Unit n° 1, Pelton box, feeding piping including fo bolts and plates, phase concrete embedded materials months - Unit n° 1, Completion of Pelton turbine n° 1 (wheel, shaft, bearings, nozzles, etc) ……… months - Unit n° 1 Butterfly valve complete with accessories and connecting Piece to penstock………… - Unit n° 1 Speed governor complete………months - Unit n° 2, Pelton box, feeding piping including bifurcation, foundation bolts and plates, 2nd phase concrete embedded materials months - Unit n° 2, Completion of Pelton turbine n° 1 (wheel, shaft, bearings, nozzles, etc) ………months - Unit n° 2 Butterfly valve complete with accessories and connecting Piece to penstock…………month - Unit n° 2 Speed governor complete…………months SECTION 2 APPLICABLE STANDARDS 1. GENERAL The Standards applicable to the supply are listed in the documents attached to the Material Requisition. Different Standards can be proposed but have to be proved equivalent or more stringent than the listed ones. Standards submitted for approval will be in Spanish and English language SECTION 3 VENDOR DOCUMENTATION In case of contract or subcontract 1. DOCUMENTS DUE DATES As minimum requirement, the documents to be issued by Seller are listed in the following Paragraph 3.4. The due dates will be mutually agreed during the final negotiation, before the issue of the Purchase Order (P.O.). The final “Document List” shall be issued by Vendor two (2) weeks after the issue of the P.O. With reference to above Paragraph 3.4, Seller is informed that in case the documents shall not be issued within the contractual due date, the penalties indicated in the purchase order will be applied. Seller is advised that, further to listed documents, supply shall include an “Equipment Dossier” complete of Material Certificates, Inspection Reports and other involved issues. 2. FORMATS OF DOCUMENTS All drawings shall be prepared using a CAD system; final electronic files shall be “DWG” type (i.e. AutoCAD® type). Other documents shall be prepared using Microsoft® Word®97 or Excel®97.The purchaser can use different system to be coordinated with us Preferred maximum size for drawing is A1. Copies of drawings in format A1, A2 or A3 shall be folded to A4 size. 3. IDENTIFICATION Any document shall have its own identification number, on its right - bottom side. The documents shall bear the Project Name, the identification of the involved equipment or item and the related contractual tag number. Each document page shall have a page number , to be referred also to the total number of pages of the document itself, as well as the number of its revision. SECTION 4 1)Turbine design data Turbines style Pelton Design Flow Qn 2.25 cmt/sec Gross head Hg 141 mt Net head Hn 140.14 m Penstock diam. 48 inch- Tick 3/8” Total length 823 Mt Project Flow curve as function of the time period See attached table Table 13: Time period in % Flow cm3/sec Time period % Flow cm3/sec No of nozzles : to be quoted Shaft Vertical or horizontal Rated speed >= 600 rpm Material : Runner Inox steel ASTM A 743 or similar Bifurcation Steel Nozzles Inox steel CrNi 17-4 or similar 2) Generator Type Syncronous, 3ph,TEFC t Rated voltage: 4.16 KV Rated frequency 60 Hz Power factor 0.8 Rated speed >= 600 rpm Overspeed <= Vn x 200 % time for 5 Min Excitation type Brushless Class of insulation F/F ( Stator/rotor wind.) Temperature rises to Class B of IEC standards/codes Construction to be quoted Protection degree IP 23 Service S1 Cooling type IC 01 Standards IEC Ambient conditions: Hasl < 1000 mt Max amb temp 45°C Hr from 70 to 90 % Ambient Tropical climate Fittings: No 1 Automatic voltage regulator No 3 C.ts on neutral point ratio …. / 1 – 30 VA burden No 3 PT100 type RTDs on stator windings No 1 Pt 100 type RTD on each bearing No 1 Anticondensation heater No 1 Speed measuring inductive type Lifting lugs No 1 set of special tools if necessary for assembly and disassembly purpose No 2 valves on admission Type Butterfly Nom diameter 700 mm Rated pressure 25 Bar Kind of closure by counterweight Kind of opening oleohydraulic or equivalent Accessoires as per art 2 above Aux voltage 220 V .60 Hz Frequency 60 Hz Commercial conditions Technical offer composition : Design and performances datas of turbine and generator Short description of components and their features List of tests of draft of quality plan Layout drawings with weights and dimensions Economical FOB Price in USA $ currency including ocean packing tests on workshop and relevant certification detailled engineering with layout dwgs, technical spec, manuals, list of electrical loads, etc Supervision to be quoted on daily tariff excluding board and Lodging, local entry permits, local transportation Delivery time: to be quoted including engineering, supply,and FOB transport, Erection period please let us have an estimation Offer validity: December 30 -09 Payment. We propose 10 % down at subcontract signature 5 % at the engineering dwgs delivery, load list, turbine final performances 70 % by milestones during costruction in your factory, test an FOB delivery 15 % at the PAC and FAC certificates issuing date Area and sales mngr
- Germany
- 2010-06-08
- Small Hydro Turbine Unit(power plant )
- Penton2 CONTENT SEC1 - EQUIPMENT / MATERIAL DESCRIPTION SEC2 - STANDARDS SEC3 - REQUIRED DOCUMENTS SEC4 – PROPOSAL CONDITION SEC 1 EQUIPMENT / MATERIAL DESCRIPTION 1 GENERAL This Material Requisition covers the technical requirements for the design, engineering, manufacturing, supply, delivery FOB, testing, supervision to erection, start up, commissioning, contractual spare parts and training of: N° 2 Pelton turbines complete with auxiliaries N° 2 Turbine inlet vales of spherical type complete with auxiliaries N° 2 Turbine speed governors complete with auxiliaries N° 2 Generators horizontal or vertical shaft according the The equipment will be installed in the Monga Power Station located in Panama Seller supply shall include all the items required in this specification as well as all the other accessory and additional equipment that the Seller deems to be necessary for a good performance and safe operation of the supplied package. Each Pelton turbine will be directly coupled with an electric generator supplied as package with the turbine Seller shall design the Pelton Turbines and their auxiliaries and shall be responsible for the design of the whole turbine /generator lineshaft The Pelton Turbines will discharge in a non-pressurized channel. 2.REQUIREMENTS 2.1 GENERAL NOTES The design, manufacturing, testing, inspection, painting, packing, supply and workshop testing of all equipment / materials included in the scope of work shall be in accordance with this Material Requisition, attached contractual specifications and applicable codes and standards. Eventual deviations or modification are acceptable provided sufficient explanation to justify them Under no circumstances, any of the statements of this specification or of the purchase order waive the supplier to provide all services and supplies necessary to fulfill its contractual obligations. Anyhow the compliance with standards, Codes and Specifications does not relieve the Vendor for his responsibility to furnish equipment, materials and accessories of proper design and manufacturing as well as fully suitable for all specified duties, operating conditions and guaranteed performances. Purchaser approval of any Vendor or Vendor sub-supplier drawings / documents shall not relieve the vendor from any of his responsibility for errors or omissions which may exists, even though Work has been done in accordance with such approved drawings and documents. Where such errors or omissions are discovered even later, they shall be made good by the Vendor at his sole expense irrespective of any approval of the Purchaser. The approval or acceptance by the Purchaser of any inspection or test does not relieve the vendor from his responsibility regarding the guarantees and will not however prejudice the right of the Company to reject the supply if it does not comply with specifications or, once erected, it does not give complete satisfaction in service. 2.2 SPECIAL Equipment shall be designed for indoor installation inside to a power house with forced ventilation, installation elevation will be 800,00 masl approx. The operating temperate will range from 0° to 50°C and the maximum relative humidity will be of 90% Equipment shall be designed for continuous operation and parallel connected to a national network 3 CONTRACT LANGUAGE (1) All contractual documents related to supply must be written in the two languages here below indicated : - English X - Spanish contract technical dwg 4.CONFLICTING REQUIREMENTS, in case of contract Any deviations from the requirements of the documents applicable to the project, shall be clearly pointed-out and submitted to the Purchaser for Approval before starting the manufacturing of the related pieces. In case a deviation is not approved by the Purchaser, the Seller will have to follow the requirements of the documents applicable to the project. Any impact on cost / schedule relating to this will be Seller responsibility. 5.GARANTEES 5.1 GENERAL Approval of design, documents, inspections and tests does not affect the contractual rights of the Purchaser, and under no circumstances waives contractual obligations of the Seller especially with regard to design, performance, construction and materials. The Seller is fully responsible for: his entire scope of work providing correct interfacing data at the boundary limits of its supply conformity of his scope of delivery and services to this specification and to all codes and standards herein mentioned. 5.2 TECHNICAL GUARANTEES 5.2.1OVERALL The Seller guarantees: faultless construction and appropriate material perfectly satisfactory design and function correct choice of material and painting that precludes corrosion and erosion, attacks, which might affect function and efficiency The Seller shall bear full responsibility for the technical accuracy, constructability, and functionality under extreme operating conditions of the systems until expiration of the guarantee period of the plant, system compatibility with other interfacing equipment and compliance with all applicable codes, standards as well as for meeting the delivery deadlines. 5.2.2DESIGN PERFORMANCE The Seller guarantees the quoted performances and the pitting and erosion performances in accordance with IEC 60-609-2-97 5.3SITE GENERAL CONDITIONS The Supplier shall take special precautions in the selection and protection of materials and equipment against deterioration due to the effects of humidity, temperature and dust. Particular attention must be paid to selection and protection of electronic components, instrumentation and temperature/humidity sensitive equipment. 5.OVERALL REQUIREMENTS FOR THE COMPLETE TURBOGENERATOR UNIT 6.1 PELTON TURBINE The hydro turbines shall be Pelton type fed by river water at the conditions described in the attached documents. The turbines will be normally operated in parallel with the grid; the normal operating mode is at the maximum load consistent with the available flow, head and other operating control parameters as mentioned in the attached specification Each turbine is equipped with an inlet valve of the butterfly type, whose technical features and operating mode shall be described with the offer Each turbine will be directly coupled to a 4,16 KV electric generator (included from the supply)with brushless or selfexcited system and shall be fitted with all the necessary supervisory and control devices to enable remote start up, operation and shutdown from the control room. 6.2 SPEED GOVERNOR Each turbine is equipped with its own speed governor whose technical features and operating mode shall be described in the offer 7. SCOPE OF SUPPLY Scope of supply will consist of, but not limited to: Equipment and materials N° 2 Pelton Turbines as per attached characteristic, each one consisting of but not limited to: Pelton wheel Turbine box Turbine shaft complete with bearings Bearing housing cooling coils Cooling water instruments as required Turbine iinjectors and deflectors Servomotors Rigid coupling with generator and relevant coupling bolts Vibration monitoring system (Option) Anchor bolts for installation on foundation First filling of lubricants. Special tools, saddles and slings for transport, erection and maintenance, incl. hydraulic device for stretching bolts, if any Commissioning spare parts Recommended spare parts Painting Internal/external piping (piping 2” dia. and above shall be supplied prefabricated with end preparation) All piping terminal connections shall be supplied complete of counter flange an bolting; if welded shall be prepared for butt welding Turbine auxiliary equipment and systems Steel base or inserts to be embedded if any Position control sensors for inyectors and deflectors Instruments, transmitters, on-off valves, control valves, metal temperature elements, etc. for turbine control, monitoring and safety system Junction boxes and cabling up terminal junction boxes Turbine local control panel with suitable interface Temporary instrumentation for tests and performance tests N° 2 Butterfly Valves each one consisting of, but not limited to: Valve body and ball Counterweight for valve closing purpose Valve foundation plates Automatic Valve by-pass to equilibrate the pressure up and down stream the max operation pressure Dismantling joint downstream of the valve Flanged interconnecting piece upstream of the valve for connection with penstock complete with of the necessary flanged taps Limit switches Oleodynamis type opening , servomotor and auxiliary equipment Anchor bolts for installation on foundation First filling of lubricants. Special tools, saddles and slings for transport, erection and maintenance, incl. hydraulic device for stretching bolts, if any Commissioning spare parts - 2 years recommended Spare parts Painting Internal/external piping (piping 2” dia. and above shall be supplied prefabricated with end preparation) All piping terminal connections shall be supplied complete of counter flange an bolting; if welded shall be prepared for butt welding Instruments, transmitters, on-off valves, control valves, metal temperature elements, etc. for control, monitoring and safety system Junction boxes and cabling up terminal junction boxes Valve local control panel with suitable interface Temporary instrumentation for tests and performance tests N° 2 Turbine Speed Governor each one consisting of, but not limited to: Control, monitoring and safety system of the turbine including any other necessary type of equipment/devices, even if not mentioned in this material requisition, in order to provide a complete black box in addition to: - Instruments, transmitters, on-off valves, control valves, metal temperature elements, impulse lines, instrument block valves, racks, JBs , Control Panels, interfacing system etc. on the Turbine / Spherical Valve including associated auxiliary circuits equipment and piping - Cables, conduits and accessories for the connections of above field instrumentation up to local junction boxes and junction boxes themselves. - Turbine Protection, Control and Supervisory system and instruments N° 2 Oleohydraulic control stations complete with motorized pumps, oil tanks, oil accumulators, oil cooler (water cooled) actuated and manual valves, filters, instruments, fittings, including - Flow reduction valve to control the actuator operation speed Conntrol panel with fitted a microprocessor OTC controller to control the turbine operation Commissioning spare parts Recommended spare parts Painting First filling of control oil.if any Special tools, saddles and slings for transport, erection and maintenance. Temporary instrumentation for tests and performance tests Services Process, mechanical, electrical and structural design for the equipment; Workshop and site inspections and tests; Training of Client personnel at site; Mechanical and electrical supervisors to the installation and test on commissioning Temporary instrumentation for turbine performance tests including installation before and removal after the test Conducting turbine performance test including preparation of procedures, test supervisory personnel, analysis of data and final report; Basic and detailed design for the equipment, systems and interfacing coordination for items not included in the scope of supply such as generators and DCS. Engineering documentation (1) Minimum required documentation shall be as per paragraph 3.4 “Required Document Table” General-Please provide with the offer a draft of: Quality plan and ITP (Inspection and Test Plan); List of tests included in the offer Packing suitable for transportation Battery limits - Penstock upstream side of the interconnecting piece (13 m from turbine axis approx) - Turbine shaft generator side: coupling flange to generator shaft flange, coupling bolts included - Civil Works: foundation plates and counterplates embedded in concrete first and second phases - Drain system: drain piping outlet into turbine discharge channel - Cooling water: in / out cooling water connections for control oil cooler and bearing housing cooling coils,if any - Electrical/Instrumentation: terminal boxes for electric motors Terminal strips of skid junction boxes Terminal strips of field instruments junction boxes Terminal strips of local control panels for connection with above junction boxes Terminal strips of local control panels for DCS interconnections Note 1) interconnection cabling between skid mounted junction boxes and local control panels are excluded from the supply interconnection cabling between field junction boxes and local control panels are excluded from the supply interconnection cabling between local control panels and DCS are excluded from the supply 8.PACKING All equipment/materials included in the scope of supply shall be packed for ocean transport. 9.NOISE LEVEL Sound pressure level equivalent 85 dBA @ 1 meter 10.DELIVERY Deliveries, FOB Italian Port, in months from purchase order date: Please fill, this schedule and return it with the offer - Unit n° 1 & 2, plates to be embedded if any months - Unit n° 1, Pelton box, feeding piping including fo bolts and plates, phase concrete embedded materials months - Unit n° 1, Completion of Pelton turbine n° 1 (wheel, shaft, bearings, nozzles, etc) ……… months - Unit n° 1 Butterfly valve complete with accessories and connecting Piece to penstock………… - Unit n° 1 Speed governor complete………months - Unit n° 2, Pelton box, feeding piping including bifurcation, foundation bolts and plates, 2nd phase concrete embedded materials months - Unit n° 2, Completion of Pelton turbine n° 1 (wheel, shaft, bearings, nozzles, etc) ………months - Unit n° 2 Butterfly valve complete with accessories and connecting Piece to penstock…………month - Unit n° 2 Speed governor complete…………months SECTION 2 APPLICABLE STANDARDS 1. GENERAL The Standards applicable to the supply are listed in the documents attached to the Material Requisition. Different Standards can be proposed but have to be proved equivalent or more stringent than the listed ones. Standards submitted for approval will be in Spanish and English language SECTION 3 VENDOR DOCUMENTATION In case of contract or subcontract 1. DOCUMENTS DUE DATES As minimum requirement, the documents to be issued by Seller are listed in the following Paragraph 3.4. The due dates will be mutually agreed during the final negotiation, before the issue of the Purchase Order (P.O.). The final “Document List” shall be issued by Vendor two (2) weeks after the issue of the P.O. With reference to above Paragraph 3.4, Seller is informed that in case the documents shall not be issued within the contractual due date, the penalties indicated in the purchase order will be applied. Seller is advised that, further to listed documents, supply shall include an “Equipment Dossier” complete of Material Certificates, Inspection Reports and other involved issues. 2. FORMATS OF DOCUMENTS All drawings shall be prepared using a CAD system; final electronic files shall be “DWG” type (i.e. AutoCAD® type). Other documents shall be prepared using Microsoft® Word®97 or Excel®97.The purchaser can use different system to be coordinated with us Preferred maximum size for drawing is A1. Copies of drawings in format A1, A2 or A3 shall be folded to A4 size. 3. IDENTIFICATION Any document shall have its own identification number, on its right - bottom side. The documents shall bear the Project Name, the identification of the involved equipment or item and the related contractual tag number. Each document page shall have a page number , to be referred also to the total number of pages of the document itself, as well as the number of its revision. SECTION 4 1)Turbine design data Turbines style Pelton Design Flow Qn 2.25 cmt/sec Gross head Hg 141 mt Net head Hn 140.14 m Penstock diam. 48 inch- Tick 3/8” Total length 823 Mt Project Flow curve as function of the time period See attached table Table 13: Time period in % Flow cm3/sec Time period % Flow cm3/sec No of nozzles : to be quoted Shaft Vertical or horizontal Rated speed >= 600 rpm Material : Runner Inox steel ASTM A 743 or similar Bifurcation Steel Nozzles Inox steel CrNi 17-4 or similar 2) Generator Type Syncronous, 3ph,TEFC t Rated voltage: 4.16 KV Rated frequency 60 Hz Power factor 0.8 Rated speed >= 600 rpm Overspeed <= Vn x 200 % time for 5 Min Excitation type Brushless Class of insulation F/F ( Stator/rotor wind.) Temperature rises to Class B of IEC standards/codes Construction to be quoted Protection degree IP 23 Service S1 Cooling type IC 01 Standards IEC Ambient conditions: Hasl < 1000 mt Max amb temp 45°C Hr from 70 to 90 % Ambient Tropical climate Fittings: No 1 Automatic voltage regulator No 3 C.ts on neutral point ratio …. / 1 – 30 VA burden No 3 PT100 type RTDs on stator windings No 1 Pt 100 type RTD on each bearing No 1 Anticondensation heater No 1 Speed measuring inductive type Lifting lugs No 1 set of special tools if necessary for assembly and disassembly purpose No 2 valves on admission Type Butterfly Nom diameter 700 mm Rated pressure 25 Bar Kind of closure by counterweight Kind of opening oleohydraulic or equivalent Accessoires as per art 2 above Aux voltage 220 V .60 Hz Frequency 60 Hz Commercial conditions Technical offer composition : Design and performances datas of turbine and generator Short description of components and their features List of tests of draft of quality plan Layout drawings with weights and dimensions Economical FOB Price in USA $ currency including ocean packing tests on workshop and relevant certification detailled engineering with layout dwgs, technical spec, manuals, list of electrical loads, etc Supervision to be quoted on daily tariff excluding board and Lodging, local entry permits, local transportation Delivery time: to be quoted including engineering, supply,and FOB transport, Erection period please let us have an estimation Offer validity: December 30 -09 Payment. We propose 10 % down at subcontract signature 5 % at the engineering dwgs delivery, load list, turbine final performances 70 % by milestones during costruction in your factory, test an FOB delivery 15 % at the PAC and FAC certificates issuing date Area and sales mngr
- Germany
- 2010-07-17
- 采购产品 (点击可查看详细)
- 采购商经营行业
- 采购商所在国家
- 更新日期
- 发送邮件
- 摄像头 电子电气产品--电子安全设备--监控器 手机信号放大器 计算机及通讯产品--通讯产品--其他通讯设备及器材 LNB高频头 计算机及通讯产品--通讯产品--卫星通讯设备 手机 / GPS 信号屏蔽器 计算机及通讯产品--通讯产品--其他通讯设备及器材 有线电视信号放大器 电子电气产品--电子电工产品--放大器 AV/RF信号转换器 电子消费品--其它电子消费品 Antenna 计算机及通讯产品--通讯产品--天线及接受器 CRT Socket 电子电气产品--其它电子电气产品 Connector and Cable 电子电气产品--其它电子电气产品 Remote control 电子电气产品--其它电子电气产品 SATELLITE / TERRESTRIAL (TV) SIGNAL COMBINER AND SEPARATOR 电子电气产品--电子电工产品--分频器 SMD Rework Station and Soldering Tools 电子电气产品--电子电工产品--电子检测设备 Satellite Receiver 电子消费品--音像视听产品--机顶盒 Splitter and Tap for CATV, MATV & SMATV (Satellite) 电子电气产品--其它电子电气产品 TV SKD 电子消费品--音像视听产品--电视 电视机芯板 电子消费品--音像视听产品--电视 高频头 电子电气产品--其它电子电气产品 录音机机芯及VCD/DVD机芯架 电子电气产品--其它电子电气产品 音视频信号切换器及放大分配器 电子消费品--其它电子消费品
- 摄像头 电子电气产品--电子安全设备--监控器 手机信号放大器 计算机及通讯产品--通讯产品--其他通讯设备及器材 LNB高频头 计算机及通讯产品--通讯产品--卫星通讯设备 手机 / GPS 信号屏蔽器 计算机及通讯产品--通讯产品--其他通讯设备及器材 有线电视信号放大器 电子电气产品--电子电工产品--放大器 AV/RF信号转换器 电子消费品--其它电子消费品 Antenna 计算机及通讯产品--通讯产品--天线及接受器 CRT Socket 电子电气产品--其它电子电气产品 Connector and Cable 电子电气产品--其它电子电气产品 Remote control 电子电气产品--其它电子电气产品 SATELLITE / TERRESTRIAL (TV) SIGNAL COMBINER AND SEPARATOR 电子电气产品--电子电工产品--分频器 SMD Rework Station and Soldering Tools 电子电气产品--电子电工产品--电子检测设备 Satellite Receiver 电子消费品--音像视听产品--机顶盒 Splitter and Tap for CATV, MATV & SMATV (Satellite) 电子电气产品--其它电子电气产品 TV SKD 电子消费品--音像视听产品--电视 电视机芯板 电子消费品--音像视听产品--电视 高频头 电子电气产品--其它电子电气产品 录音机机芯及VCD/DVD机芯架 电子电气产品--其它电子电气产品 音视频信号切换器及放大分配器 电子消费品--其它电子消费品
- 2010-07-05
- 衣橱棚架 家居用品--一般家庭用品--衣架 园艺用品 园林用品--其他园林用品--配套用具用品 组立乐系列晾晒衣架 家居用品--一般家庭用品--衣架 Washing tools 浴室用品--洗浴用具--毛巾架 不锈钢晾衣架 家居用品--一般家庭用品--衣架 厨房架子 家居用品--一般家庭用品--衣架 室外晾衣产品 家居用品--一般家庭用品--衣架 旋转式晾衣架 家居用品--一般家庭用品--衣架
- 衣橱棚架 家居用品--一般家庭用品--衣架 园艺用品 园林用品--其他园林用品--配套用具用品 组立乐系列晾晒衣架 家居用品--一般家庭用品--衣架 Washing tools 浴室用品--洗浴用具--毛巾架 不锈钢晾衣架 家居用品--一般家庭用品--衣架 厨房架子 家居用品--一般家庭用品--衣架 室外晾衣产品 家居用品--一般家庭用品--衣架 旋转式晾衣架 家居用品--一般家庭用品--衣架
- 2010-06-28
- 采购产品 (点击可查看详细)
- 采购商经营行业
- 采购商所在国家
- 更新日期
- 发送邮件
- 抹泥刀;砌砖刀;油灰刀;
- 抹泥板 油灰刀 木工铣刀
- 2010-06-24
- 健身器材;运动器材;休闲用品;健身椅;billy blanks;健身踏板;玩具;性用品;保健用品;美腹机;按摩器材;魔力圈;健身器;健身用品;体育器材;体育用品;AB 健身椅;电视购物;电视直销;AB椅系列;
- 健身器材 其他健身器材 跳绳 哑铃 健身椅 组合健身器械
- 2010-07-21
- 红酒塞;红酒开瓶器;酒具套装;酒具礼品;酒塞;促销礼品;婚礼礼品酒塞;锌合金酒塞;锌合金开瓶器;树脂酒塞;兔形开瓶器;导酒器;割刀;酒环;红酒开瓶器套装;婚礼酒塞;木盒酒具礼品套装;皮盒酒具礼品套装;木盒红酒开瓶器套装;仿古盒红酒开瓶器套装;
- 酒具 钥匙配饰 开瓶器 金属工艺品 广告促销礼品 塑料、树脂工艺品
- 2010-08-04
- 高速钢;模具钢;切削工具;
- 模具钢 工具钢 铣刀
- 2010-07-06
- 量具，仪表，百分表，千分表，杠杆表，测厚规，深度表，内径量表，定中心表，硬度计;百分表;千分表;内径量表;测厚规;深度表;邵氏硬度计;定中心表;
- 测量工具 其他计量标准器具 机械量仪表
- 2010-08-03
- 电焊机; 电焊钳; 等离子切割机; 点焊机; 弧焊机; 接地钳; 减压器; 电焊机组合系列; 焊柜; 割柜; 电焊面罩; 气体保护焊机;
- 电焊机; 电焊钳; 等离子切割机; 点焊机; 弧焊机; 接地钳; 减压器; 电焊机组合系列; 焊柜; 割柜; 电焊面罩; 气体保护焊机; 弧焊机; 电阻焊机; 点焊机; 等离子切割机;
- 2010-08-05
- 吸尘器及吸尘袋;砂带机及吸尘袋;砂纸机及磨头、砂纸;抛光机及毛巾布抛光罩;抛光机及海绵抛光罩;打蜡机及羊羔绒打蜡帽;打蜡机及海绵打蜡罩;电动工具附件;园林工具附件;气动工具附件;五金冲压制品;
- 磨片、切割片 砂纸 冲压模 抛光机 打蜡机 砂带机
- 2010-07-21
- Material; Machine; hand tools; hardware; Printing; DIY tools; 五金、工具;
- Material; Machine; hand tools; hardware; Printing; DIY tools; 五金、工具; 手锯、木工锯; 机械零部件加工; 移印机; 丝印机; 其他电容器; 充填机械;
- 2010-07-20
- 檢測儀器;捲尺;螺絲起子
- 拉力试验机
- 2010-09-05
- vacuum cleaner; high pressure washer; hardware tools; measuring tools;
- vacuum cleaner; high pressure washer; hardware tools; measuring tools; 工具箱; 测量工具; 家用吸尘器; 其他生活小家电;
- 2010-08-03
- 采购产品 (点击可查看详细)
- 采购商经营行业
- 采购商所在国家
- 更新日期
- 发送邮件
- SPT-SMALL PRECISION TOOLS CO.,LTD
- 综合|其它
- 2010-06-18
- Ningbo Unitel Tools Co.,Ltd
- 机械|工业|加工
- 2010-07-21
- RUKO GmbH Precision Tools
- 机械|工业|加工
- 2010-06-14
- U.F.P.SPECIAL CUTTING TOOLS
- 机械|工业|加工
- 2010-06-29
- DRAGON PRECISION TOOLS CO.,LTD.
- 机械|工业|加工
- 2010-06-18
- Akar Tools Ltd.
- 房产|建筑|装潢|五金
- 2010-07-29
- GERMAN TOOLS
- 房产|建筑|装潢|五金
- 2010-08-21
- Vishal Tools & Forgings Pvt.Ltd
- 房产|建筑|装潢|五金
- 2010-07-06
- Carbide Cutting Tools Pvt.Ltd
- 机械|工业|加工
- 2010-08-11
- NANJING SANCHAO DIAMOND TOOLS CO.,LTD
- 通信|通讯|电子
- 2010-07-17
- INDUSTRIAL TOOLS,INC.
- 通信|通讯|电子
- 2010-06-18
- SPT-SMALL PRECISION TOOLS CO LTD
- 通信|通讯|电子
- 2010-09-05
- T+C MACHINE TOOLS PTE LTD.
- 通信|通讯|电子
- 2010-08-15
- maxwell tools international co.,,ltd
- 2010-06-08
- Bright Burnishing Tools pvt ltd
- 化工|能源|环保
- 2010-07-14
- diabonic honing ledges & tools pvt ltd
- 化工|能源|环保
- 2010-06-15
- B M MACHINE TOOLS srl
- 化工|能源|环保
- 2010-08-27
- M T T MACHINE TOOLS TRADING SRL
- 化工|能源|环保
- 2010-07-17
更多TOOLS买家 询盘 TOOLS海关提单信息:
x tools
psp tools
spy tools
gun tools
lab tools
Tie Bar Tools
tools kit
x-431 tools
keychain tools
kids tools
lineman tools
leather tools
lawn tools
micro tools
mining tools
Extension tools
outdoor tools
network tools
networking tools
Hair tools
jet tools discount
jd discount tools
hyde tools
mechanic tools
hammer tools
handy tools
ironworker tools
Impact Tools
Jewelry Tools
jewellery tools
浙ICP备10024991号